We have completely revised our homepage and integrated a contemporary online store. Products can be found more easily via the store and various filters also help to select the right product. The navigation on the homepage is clearly arranged and thus user-friendly. It will also be possible for our dealers to place orders via the […]
With the Project ONE we have new products and at the same time the two KOSMIK types are no longer needed. We have also adjusted the prices of our merchandising products. After we recently had to increase our prices – after years of price stability – we are naturally also repeatedly asked about this topic. […]
For the KOLIBRI models (HV-I and LV-I) we have now made the new software V3.3 available for download. The new software enables active protection of the KOLIBRI’s electronic components during rapid load changes and avoids false overcurrent fault detection.In the event of a short-term motor blockage, for example, the current is reduced to zero. After […]
KOSMIK 170/210/250/300 HV / HV-I In the firmware version V1.18 for the KOSMIK 170/210/250/300 HV / HV-I the following points have been added and improved: To avoid errors and malfunctions during the update, the update process must be carried out as described below. The first step is to install the bootloader update on the KOSMIK […]
Software update V3.0 For all KOLIBRI models (HV-I and LV-I) we have now made the new software V3.0 available for download. The new software V3.0 is a milestone in the performance of KOLIBRI controllers! The most important thing in advance: it includes several new and adapted safety features – to keep your model on top! […]
With the V3.0 software, convenient, direct parameterization via the remote control “VBAR Control Touch” or “VBAR Control Classic” is now also possible. This offers the great advantage of being able to try out different settings of the controller on the flying field! Other telemetry adjustments:
With the new bootloader, sending in a KOLIBRI controller for service in case of an unintentional interrupted or incomplete update is history! In order to use the new bootloader, the new controller software V3.0 must be installed on the KOLIBRI. Then the bootloader update to V3.0 must be performed as described below. The new bootloader […]
This software version is required to set up the KOLIBRI LV-I or HV-I with the V3.0 software and to load saved controller setups.
