May 21, 2025: New K-Config V1.3.12
PC software (Windows™) for ProgUNIT and PROGDISC Software version 1.3.12 is required to set up the KOSMIK HV-I+ controller from firmware V1.26 and to load saved controller setups.
May 21, 2025: New firmware for KOSMIK 170/210/250 HV / HV-I/HV-I+:
KOSMIK 170/210/250 HV / HV-I/HV-I+ V1.26: The following points have been added in firmware version V1.26 for the KOSMIK 170/210/250 HV-I/HV-I+: A bootloader update is required for V1.26, as described in the steps below. The firmware update to V1.26 can then be carried out.
October 16, 2023 – Software update KOSMIK 170/210/250 HV / HV-I
In the firmware version V1.25 for the KOSMIK 170/210/250 HV-I the following item has been added. No bootloader update is necessary for V1.25, provided V1.17 or higher is installed on your controller. If a lower version than V1.17 is on your controller, the bootloader update must be performed in advance as described below and only […]
July 12, 2023 – System switch
SOBEK Drives GmbH will convert the existing enterprise resource planning system on July 17, 2023. This will bring various changes and temporary limitations to our systems: As of Monday, July 17, 2023, we will already be working with the new system. However, we ask for your understanding that in the period after the system changeover, […]
April 4, 2023 – ROTOR live in Iffezheim
After three years of abstinence had on 11. and 12. March the ROTOR Live in Iffezheim opened the gates again. KONTRONIK was again represented with a booth and our crew could use the opportunity to present our well-known and proven products to the interested audience in personal contact. We were able to have many interesting […]
April 4, 2023 – Product discontinuation KOSMIK 160 and 200
After we have had the new KOSMIK series HV-I with integrated telemetry in our program for some time now, it is finally time to say goodbye to the older KOSMIKs 160 HV and 200 HV in their well-deserved retirement. If you have already surfed on our new homepage and missed the two KOSMIK types, now […]
April 4, 2023 – Price list 2023
With the Project ONE we have new products and at the same time the two KOSMIK types are no longer needed. We have also adjusted the prices of our merchandising products. After we recently had to increase our prices – after years of price stability – we are naturally also repeatedly asked about this topic. […]
April 4, 2023 – KONTRONIK homepage now with integrated online store!
We have completely revised our homepage and integrated a contemporary online store. Products can be found more easily via the store and various filters also help to select the right product. The navigation on the homepage is clearly arranged and thus user-friendly. It will also be possible for our dealers to place orders via the […]
April, 4 2023 – New KONTRONIK motor: Project ONE – the inrunner motor!
A real hit at ROTOR Live was our brand-new inrunner motor Project ONE, which was presented for the first time at the show and attracted very strong interest. The motor is intended as an alternative to the PYRO 750 and is available with 530kV, 590kV or 650kV. Its high-performance cooling concept keeps the motor cool, […]
April 4, 2023 – New software for the KOLIBRIS
For the KOLIBRI models (HV-I and LV-I) we have now made the new software V3.3 available for download. The new software enables active protection of the KOLIBRI’s electronic components during rapid load changes and avoids false overcurrent fault detection.In the event of a short-term motor blockage, for example, the current is reduced to zero. After […]