Due to the significant increase in procurement and material costs over the past few months, we are unfortunately obliged to adjust the prices for all KPGs effective October 1, 2026. We continuously review our cost structures and do everything we can to keep price increases to a minimum. However, the current developments in the procurement […]
As of now, we can be reached under new telephone numbers. We will only be available to a limited extent via our previous telephone number.
Effective immediately, the KK600 heat sink has been discontinued and is no longer available.
Unfortunately, due to a magnet shortage in Europe, we haven’t been able to assemble any more PYRO 700s for quite some time. But the wait is over—we’ve finally received the long-awaited shipment of magnets, and we can now start assembling all motors again.
As part of the standardization of our product portfolio, the KPG 25 4.2:1, KPG 25 5.2:1, and KPG 27 4.2:1, as well as their spare parts, will be discontinued and removed from the product range effective July 1, 2026. This will also result in a change in the gearboxes for the KIRA 400 and KIRA […]
PC software (Windows™) for ProgUNIT and PROGDISC Software version 1.3.12 is required to set up the KOSMIK HV-I+ controller from firmware V1.26 and to load saved controller setups.
KOSMIK 170/210/250 HV / HV-I/HV-I+ V1.26: The following points have been added in firmware version V1.26 for the KOSMIK 170/210/250 HV-I/HV-I+: A bootloader update is required for V1.26, as described in the steps below. The firmware update to V1.26 can then be carried out.
At KONTRONIK we are constantly working on improving our products to offer our pilots the best possible equipment for their performance! For our KOLIBRI LV-I series the new software version V1.4 is now available for download. It includes the following improvement: The KOLIBRI LV-I controllers have so far outputted a voltage of 9V until initialization. […]
